Introduction:
If you’re like most people, your washer is one of the most used appliances in your home. And like any appliance that uses a lot, washers can sometimes experience problems.
While some washer repair issues are more common, all can be fixed with a little knowledge and effort. This guide will cover the eight most common washer repair issues and how to fix them.
- Washer doesn’t start.
If your washer doesn’t start, the first thing you should check is the power supply. Ensure the washer is plugged in and the circuit breaker hasn’t tripped.
The problem may be with the washer’s lid switch if the power supply is fine. This switch prevents the washer from running if the lid is open, so if it’s not working properly, the washer won’t start.
- Washer doesn’t fill.
If your washer doesn’t fill, the first thing you should check is the water supply. Ensure the water valves are turned on, and there isn’t a blockage in the supply lines.
The problem may be with the washer’s fill valve if the water supply is fine. This valve controls the water flow into the washer, so if it’s not working properly, the washer won’t fill.
- Washer doesn’t drain.
If your washer doesn’t drain, the first thing you should check is the drain hose. Make sure the hose isn’t kinked or blocked.
The problem may be with the washer’s pump if the drain hose is clear. This pump helps to remove water from the washer, so if it’s not working properly, the washer won’t drain.
- Washer isn’t spinning.
If your washer isn’t spinning, the first thing you should check is the load. If the shipment is too heavy, the washer may be unable to turn it.
The problem may be with the washer’s drive belt if the load is fine. This belt helps to spin the washer’s drum, so if it’s broken or worn, the washer won’t spin.
- Washer makes strange noises.
If your washer is making strange noises, the first thing you should check is the load. If the bag is unbalanced, the washer may cause noise as it tries to spin.
The problem may be with the washer’s bearings if the load is balanced. These bearings help to support the washer’s drum, so if they’re worn or damaged, the washer may make noise.
- Washer leaks water.
If your washer is leaking water, you should first check the water supply lines. If they’re loose or damaged, they may be causing the leak. If the water supply lines are fine, the problem may be with the washer’s pump. This pump helps remove water from the washer, so if it’s damaged or leaking, it may cause a leak.
- Washer doesn’t agitate.
If your washer doesn’t agitate, the first thing you should check is the load. If the shipment is too heavy, the washer may be unable to mix it.
The problem may be with the washer’s drive belt if the load is fine. This belt helps to drive the washer’s agitator, so if it’s broken or worn, the washer won’t agitate.
- Washer doesn’t dispense detergent.
If your washer doesn’t dispense detergent, the first thing you should check is the detergent drawer. Ensure the drawer is properly seated and the detergent isn’t clogged.
If the drawer is fine, the problem may be with the washer’s pump. This pump helps to circulate the detergent and water through the washer, so if it’s not working properly, the washer won’t dispense detergent.
Conclusion:
There are several possible reasons why your washer isn’t working properly. You can narrow down the cause and find a solution by troubleshooting the problem.